Exterior wall aluminum veneer construction technology has those

 

 

 

The installation of aluminum veneer is the final stage of the whole aluminum veneer curtain wall project, so the construction process of exterior wall aluminum veneer is not complicated, which is mainly divided into three steps: preparation, installation and acceptance:

 

 

 

1. preparation phase

 

This is the preparation work before the construction of the exterior wall aluminum veneer. Prepare the corresponding materials and tools, check and accept the aluminum veneer of the exterior wall to be installed, check whether the data such as the specifications and dimensions of the aluminum veneer are qualified, and stack the aluminum veneer of the exterior wall in an orderly manner.

 

 

2. installation phase

 

After the tools and materials are prepared, according to the actual construction situation, reasonably arrange the staff to install the exterior wall aluminum veneer in sequence according to the design number. During the installation, enough space required for installation should be left on site to prevent accidents during installation or trouble caused by too narrow space.

 

 

3. acceptance stage

 

After the installation of the exterior wall aluminum veneer, some places that need to be sealed or waterproof can be caulked and glued. The size of the foam strip for filling should be selected according to the size of the glue joint, and the surface of the aluminum veneer of the exterior wall should be smooth when filling. In the process of gluing, the glue injection should be continuous and full, and the glue scraping should be uniform and smooth, and there should be no knife skipping phenomenon. Tear off the exterior wall aluminum veneer surface protective film for overall acceptance.