Related knowledge about carved aluminum veneer

 

Carved aluminum veneer是采用优质的高强度铝合金板材(铝合金板材厚度1.5-4.0mm)，按照一定的尺寸、形状和构造加工成型，对其外表进行氟碳树脂涂装处理的一种高档建筑装饰材料。其常用材料型号为3003，状态为H24，最基本尺寸为1220×2440mm(平板)。成型铝板的最大尺寸可达1600×4500mm。

1. Structure of carved aluminum veneer:

Carved aluminum veneer is mainly composed of panels, hanging ears and reinforcing ribs. The back of the panel with carved aluminum veneer can increase heat preservation and heat insulation materials. Hanging lugs can be directly formed by surface bending and stamping, or can be formed by riveting angle codes on the panel. The reinforcement and the welding screws on the back surface of the panel are connected with the panel to form a solid whole, which greatly enhances the strength and rigidity of the carved aluminum veneer. It ensures the flatness and wind resistance of the carved aluminum veneer during long-term use.

2. Features of carved aluminum veneer:

Carved aluminum veneer is light in weight, easy to clean, maintain, stain resistance and good decorative effect. Compared with the traditional aluminum-plastic panel, it is easier to process on-site and has the characteristics of small loss, especially the steel degree and strength greatly exceed the aluminum-plastic panel curtain wall. Carved aluminum veneer is sprayed with fluorocarbon, which is free from ultraviolet rays, humidity, temperature and atmospheric corrosion, never fades, has better bending strength and excellent wind pressure resistance.

3. Use of carved aluminum veneer:

Carved aluminum veneerThe main use is the package column decoration, exterior wall decoration, lobby facade, large buildings, hotels, KTV, schools, hospitals, public places, suspended ceiling, overpass, sports square and shopping malls and other places.