Wavy arc shaped aluminum square ceiling

  

The wave arc shaped aluminum square ceiling has won the trust of engineering decoration in various industries with its distinctive visual effect, strong visual impact and unique decorative effect. We can see the wave arc shaped aluminum square ceiling ceiling with various design styles on many occasions, showing various distinct and artistic ceiling effects. So, how is the corrugated curved aluminum square ceiling processed? Professional corrugated aluminum square ceiling manufacturer introduces you to the processing procedure of corrugated curved aluminum square ceiling.

CNC engraving material

After refinement according to the design drawings, the data is input into the data center. The numerical control engraving machine will carry out numerical control cutting according to the instructions. The arc-shaped aluminum square material consists of three pieces, with a side height of * 2 and a bottom width of three pieces. Because the bottom width material is regular, the conventional plate shearing machine can be used for cutting. The numerical control engraving cutting is used for processing two pieces of materials with a side height arc,

Blending hem

After the materials are prepared, batching shall be carried out. The purpose of batching is to confirm and comb the quantity, and then fold the edge with a bending machine. The folding edge at the opening is generally about 2cm, which is actually folded according to the needs of the hoisting system.

Reinforcement

According to the size of the arc effect, the reinforcement is generally used for reinforcement. The thickness is sufficient, and the depth is small without reinforcement. The thickness is thin and the depth is large. It is generally recommended to reinforce to ensure the board effect.

Spot welding forming fixing

The forming and fixing shall be carried out by means of spot welding. First, the base material and one of the side materials shall be spot welded and fixed, and then the other side material shall be spot welded. In the process of spot welding, the size of the board and the flatness of the board shall be properly corresponded.

Full welding process to ensure stability

Full welding processing is required after spot welding forming, because the board is relatively thick and heavy, if only spot welding forming is performed, the board is easy to crack, so full welding processing is required for the welding line to ensure the stability of the board and the flatness of the whole square connection.

Polishing and grinding

After the full welding is completed, the other party shall carry out size confirmation and flatness adjustment, and polish after confirmation. The treatment of the welding line is more critical. If the surface polishing is not flat enough

The whole will directly affect the quality of the sprayed coating, so the master will be very careful when polishing.

Coating processing

According to the color of the design scheme for coating processing, arc aluminum square can choose electrostatic powder spraying, paint spraying, fluorocarbon spraying, thermal transfer wood grain processing, the choice of process according to the design style

and the requirements of the use environment.

Packaging

After the surface of the curved aluminum square is processed, it is usually pasted with white film and then wrapped with bubble glue. Due to its irregular shape and weight factors, the curved aluminum square is usually nailed in wooden cases, and paper is placed on all sides to protect it to ensure

Product is not damaged

Through the above procedures, we should have some understanding of the production of arc aluminum square, arc aluminum square processing procedures are relatively complex, production efficiency is not very high, so the production cycle is generally relatively long, customers in the procurement time is better to reserve a good time to ensure the construction progress.

Special-shaped aluminum square pass, such as arc-shaped aluminum square pass, can be either horizontal arc processing or vertical arc processing. The degree of arc depends on the requirements of the design scheme. However, arc-shaped aluminum square pass with too large arc will not be selected. If the arc is too large, the thickness of square pass will naturally be required to be high, thus affecting the cost and price. For arc-shaped aluminum square pass, aluminum square pass with sufficient thickness can be selected for direct bending processing and aluminum square bending processing, there will be losses at both ends. Generally, 40cm of losses need to be reserved. The arc-shaped aluminum square can also be obtained by welding and polishing special-shaped plates. The engraved plates are combined with welding and polishing, usually full welding, so as to ensure stable performance to avoid cracking during processing or transportation. After welding, the front surface needs to be polished smoothly, especially if paint or fluorocarbon is required, which tests the polishing master\'s technology, the whole spraying surface, especially the place where the two plates are welded, needs to form a whole with the flat plate surface, and any unevenness is not allowed. However, the wave-shaped aluminum square ceiling is an aluminum square ceiling with wave-shaped effect, which is generally the wave-shaped effect of water ripple. The wave-shaped aluminum square ceiling is also opened first and then polished by welding. One problem with the wave-shaped aluminum square ceiling is that the more waves, the waste generated, therefore, it is generally not recommended that customers choose the design effect of too large waves to avoid excessive cost. Engineers suggest that the depth is better within 1.5 meters and the production width is generally around 1.2 meters.