Factors causing deformation of fluorocarbon aluminum veneer

Why fluorocarbon aluminum veneer can quickly become popular, mostly from its new image, has become a hot topic of people, it has attracted a high degree of attention with its own creativity and ingenious design, bringing many consumers a new visual experience. Fluorocarbon aluminum veneer is a metal product with high fire rating and good processing performance. Because of its simple and practical assembly method, it is not restricted by the seasonal environment, so it is very convenient to install and use, and it is suitable for all seasons.

 

Since aluminum veneer is so popular, the following small series also give you a popularization of fluorocarbon sprayed aluminum veneer deformation factors!

 

1. When the size of the aluminum veneer reaches the corresponding specifications, reinforcing ribs shall be added on the back to enhance the hardness of the plate surface. According to the industry standard, reinforcing ribs shall be added if the width of the parallel short side exceeds 600mm. This is also the industry standard. If the aluminum veneer can be installed reasonably, deformation of the aluminum veneer can be avoided.

 

2. When packaging aluminum veneer, it is necessary to strictly follow the packaging process. Each aluminum veneer should be packaged with a protective film and then a layer of bubble film.

 

3. In the process of transportation, loading and long-distance transportation, attention should be paid to the placement of aluminum veneer. If the logistics is carried out, wooden boxes must be used for transportation. If the whole vehicle is shipped, the aluminum veneer and the guardrail plate should also be separated by wood to prevent damage to the aluminum veneer.

 

 4、在Aluminum veneer安装过程中，对比较大件的Aluminum veneer搬放安装时都要比较细心，大件Aluminum veneer相对比较笨重，较容易损坏。