What is the acceptance standard of aluminum curtain wall

The installation quality acceptance of aluminum curtain wall is related to the effect of building appearance. As the most direct manifestation of building exterior wall decoration, the acceptance standard is the key, and it is necessary to check whether the installation process meets the relevant standards stipulated by the state. So what kind of aluminum curtain wall is qualified? Today, the editor will take you to understand.

 

The quality of the surface of the aluminum curtain wall and the qualification of the installation process are probably accepted from the following aspects:

1. whether the verticality and levelness of aluminum curtain wall installation pass.

2. whether the seam line straightness, height difference, seam width, etc. meet the national standard.

3. look at the surface for scratches and the size of the total abraded area. According to the acceptance standard of building decoration engineering, the obvious scratch length on the surface of aluminum curtain wall is less than 100mm, and the total scratch area shall not be greater than 500 mm² mm.

4. whether the plate angle misalignment error of adjacent aluminum veneer is within the allowable range.

The above is the acceptance criteria for aluminum curtain wall. I hope you will have a closer understanding of aluminum curtain wall after reading it.