Aluminum veneer installation method

(I) the line, fix the steel frame, and bounce the position of the frame to the base. The skeleton is fixed on the main structure, and the quality of the main structure shall be checked before setting out.

 

(II) the connector of the fixed frame, and weld the connector on the column of the main structure to fix the frame.

 

(III) and fix the skeleton, and carry out anti-corrosion treatment after the skeleton is welded. The installation position of the skeleton is accurate and the structure is firm. Check center line, surface elevation, etc. after installation. In order to ensure the installation accuracy of the plate, it is advisable to use theodolite to penetrate the mullion rod of the beam.

 

(IV) installation of aluminum veneer, aluminum veneer installation fixed to be solid and reliable, simple and easy.

 

1. The gap between the board and the board should be internally treated to make it flat and smooth.

 

2. After the aluminum veneer is installed, cover and protect the parts that are easy to be contaminated with plastic film or other materials.