Advantages and installation problems of hyperbolic aluminum veneer curtain wall

Advantages and installation problems of hyperbolic aluminum veneer curtain wall

Tightness

The biggest advantage of the double aluminum veneer curtain wall is the sealing, and its sealing has three characteristics: internal waterproof, glue sealing, and structural waterproof. And it uses the internal structure waterproof, and glue sealing treatment work, to ensure the waterproof function to the relevant extent. Selection of high-quality aluminum alloy materials, through precision machining and manufacturing, so the use of hyperbolic aluminum veneer long life, to a certain extent, save the cost.

Strong technical content

Different from the conventional shape of aluminum veneer, the manufacturing process of hyperbolic aluminum veneer is relatively laborious and difficult, and the requirements for machines and technical workers are relatively high. The hyperbolic aluminum veneer curtain wall can produce different shapes, and can also be sprayed with various colors of paint to create different personalized construction styles and satisfy different construction requirements.

If you want to do it well, you can only splice modules. Each plate is an independent and non-interchangeable forming surface. After the plate is formed, it is fixed with a unified and interchangeable rear bracket. The size of the rear bracket is fixed and matched with the wall keel. It is packaged during transportation and is not deformed. During installation, the rear bracket should not touch the front forming surface, and the forming surface is not stressed. It will not be deformed. The best front film. The overall installation is completed, from top to bottom packaging.

Xiaobian feels that if this is done, there should be no problem. The distortion is largely caused by the installation of the wall surface. You are fixed on the bracket before the wall is installed. The deformation range can be controlled to a minimum. After all, debugging in the factory is much more accurate than on site. Of course, this will increase the installation, rear bracket module, transportation, packaging costs. But you get what you pay. It\'s not that it\'s not good, it\'s that the wages haven\'t been spent.

Installation Issues

These include the adjustment of the system to consider the installation, the quality of the on-site installation, which may be an installation problem, the consideration of the system installation adjustment, and the quality control of the on-site installation.

Plate, it is estimated that one of the reasons is that the force is uneven when the plate is installed and bent. There are various reasons, this kind of manual installation operation of the hyperbolic surface, a plate a plate of the assembly of this effect is inevitable. After all, it is not good to map on the computer.

首先你说的双曲只是整个造型上是双曲，但是实际上你用的铝板是平板，所以你的铝板既然都不是双曲的，也就是平板来拼装成双曲的外形，这个效果可以先自己想一想，如果这个双曲的半径足够大的话，大到单块板的弧线长度与弦长都一样了(也就是基本接近了)，这样拼装出来的效果会更好。要不然单块板最好好用双曲加工。

Followed by the processing of aluminum plate, the arrangement of the stiffener, the deformation control of the processing, especially the edge position. Then the aluminum plate surface layer of the paint control, color, poor, etc.

Third, in the process of aluminum plate installation, workers install quality control, aluminum plate this thing, must not be knocked, of course, do not arbitrarily secondary processing, it is best to avoid secondary processing. Installation should pay special attention to the control of flatness.

The fourth is the quality control of the installation of the skeleton. Generally speaking, the design can basically meet the requirements, and the important thing is the installation quality control on site.

The color of the aluminum plate is also very important. In particular, aluminum plates are used in large areas. Be sure to pay attention.