Company News
Company News
- What are the characteristics of high quality aluminum veneer
- What are the safety experiences of aluminum alloy air conditioning covers?
- Identification of aluminum veneer
- Aluminum veneer curtain wall installation some unpopular knowledge
- Wood grain aluminum veneer spraying process
Industry dynamics
- The advantages of aluminum veneer knowledge
- Two processing steps of hyperbolic aluminum veneer
- Simple understanding of aluminum alloy air conditioning hood related to carved aluminum plate
- Main considerations for aluminum veneer device
- Curved aluminum veneer with complex process
FAQ
- What are the design factors of curtain wall aluminum veneer
- How to store the carved aluminum plate after processing
- Imitation stone grain fluorocarbon aluminum veneer customization is welcomed by everyone
- What are the thermal transfer processes for wood grain aluminum veneer
- Wavy arc shaped aluminum square ceiling
Contact Us
Mobile phone: 13074271912
Tel: 130-7427-1912
Email: 3457334962@qq.com
Address: Jianmei Building, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Company News
Installation steps for exterior wall aluminum veneer
- Author: Kaimai
- Release date: 2020-07-16 10:22:05
- 点击:0
The installation of exterior wall aluminum veneer is the final stage of the whole aluminum veneer curtain wall project, so the construction process of exterior wall aluminum veneer is not complicated, mainly divided into three steps: preparation, installation and acceptance:
1. preparation phase
This is the preparation work before the construction of the exterior wall aluminum veneer. Prepare the corresponding materials and tools, check and accept the aluminum veneer of the exterior wall to be installed, check whether the data such as the specifications and dimensions of the aluminum veneer are qualified, and stack the aluminum veneer of the exterior wall in an orderly manner.
2. installation phase
After the tools and materials are prepared, according to the actual construction situation, reasonably arrange the staff to install the exterior wall aluminum veneer in sequence according to the design number. During the installation, enough space required for installation should be left on site to prevent accidents during installation or trouble caused by too narrow space.
3. acceptance stage
After the installation is completed, some places that need to be sealed or waterproof can be caulked and glued. The size of the foam strip for filling should be selected according to the size of the glue joint, and the surface of the aluminum veneer of the exterior wall should be smooth when filling. In the process of gluing, the glue injection should be continuous and full, and the glue scraping should be uniform and smooth, and there should be no knife skipping phenomenon. Tear off the exterior wall aluminum veneer surface protective film for overall acceptance.