Processing difficulty determines the price of hyperbolic aluminum veneer

Hyperbolic aluminum veneer is subject to the same point, and different directions and radii have curved surfaces. We usually mistake some simple curved plates for hyperbolic aluminum veneer. At present, the market price of aluminum ingots in China is often above 10000 yuan/ton, and the price of hyperbolic aluminum veneer is much higher than that of conventional aluminum veneer. For example, if the conventional aluminum veneer is around 200, the hyperbolic aluminum veneer with the same thickness and paint is normal between 500 and 600.

However, hyperbolic aluminum veneer has its reasons, mainly because of the processing difficulty of hyperbolic aluminum veneer.

On the one hand, the hyperbolic aluminum veneer is not easy to form in the sheet metal processing stage, and the production is difficult. The center of the hyperbolic aluminum veneer is on a different surface from the curved surface, and a slight change in radian and radius requires a lot of adjustment. The requirements for aluminum veneer machines and processing masters are also very high, and these factors are indispensable.

On the other hand, due to the unique shape of the hyperbolic aluminum veneer, conventional electrostatic paint spraying cannot be used when painting, and manual spraying is required. Doing so helps to prevent the problem of uneven paint coating on the surface of the aluminum veneer and avoid problems that affect the decorative effect.

　　之所以讲这么多，是因为一些幕墙装饰过程中，hyperbolic aluminum veneerIt cannot be avoided, so pay more attention. To add, because the production of hyperbolic aluminum veneer is difficult, it is not surprising that the processing cycle is longer.