Four factors of deformation of fluorocarbon aluminum veneer

Why fluorocarbon aluminum veneer can quickly become popular, mostly from its new image, has become a hot topic of people, it has attracted a high degree of attention with its own creativity and ingenious design, bringing many consumers a new visual experience. Fluorocarbon aluminum veneer is a metal product with high fire rating and good processing performance. Because of its simple and practical assembly method, it is not restricted by the seasonal environment, so it is very convenient to install and use, and it is suitable for all seasons.

 

Since fluorocarbon aluminum veneer is so popular, the following small series also give you a popularization of fluorocarbon aluminum veneer deformation of the four factors!

 

1. When the size of fluorocarbon aluminum veneer reaches the corresponding specifications, reinforcing ribs shall be added on the back to enhance the hardness of the plate surface. According to industry standards, reinforcing ribs shall be added if the width of parallel short sides exceeds 600mm. This is also an industry standard. If it can be installed reasonably, deformation of fluorocarbon aluminum veneer can be avoided.

 

2. When packaging fluorocarbon aluminum veneer, it is necessary to strictly follow the packaging process. Each fluorocarbon aluminum veneer shall be packaged with a protective film and then a layer of bubble film.

 

3. In the process of transportation, loading and long-distance transportation, attention should be paid to the placement of fluorocarbon aluminum veneer. If the logistics is carried out, wooden boxes must be used for transportation. If the whole vehicle is shipped, the fluorocarbon aluminum veneer and the guardrail board should also be separated by boards to prevent the fluorocarbon aluminum veneer from being damaged.

 

4. During the installation process of fluorocarbon aluminum veneer, the relatively large fluorocarbon aluminum veneer should be moved and installed carefully. The large fluorocarbon aluminum veneer is relatively heavy and easy to damage.