Fluorocarbon aluminum veneer in the construction of five key points

Fluorocarbon aluminum veneer has excellent fading resistance, corrosion resistance, anti ultraviolet ability, strong crack resistance and can withstand harsh weather environment, color selection, good metal gloss, strong impact resistance and other advantages, fluorocarbon aluminum veneer in the construction process should pay attention to the five aspects:

1. During the processing of fluorocarbon aluminum veneer, all aluminum plates should not be processed at one time. The final aluminum plate and corner plate in each device area should not be processed temporarily. After all fluorocarbon aluminum veneer devices in this area are finished, the on-site data measurement should be carried out again to obtain accurate scale reprocessing to prevent unnecessary rework and economic losses.

2. For the fluorocarbon aluminum veneer posted device method, the most common and most difficult quality question is that the joints between the blocks are not flat, which should lead to sufficient attention. In addition to paying attention to the uniform and consistent thickness of the adhesive during the construction process, the temporary fixing method shall not be canceled too early, generally not less than 12h.

3. Fluorocarbon aluminum veneer with patch type device should be selected. Glass magnesium board or large core board with waterproof performance should be selected as the bottom board, and paper sheeting board should not be selected. The main reasons are: First, the paper gypsum board itself has low strength and is not firmly bonded to the aluminum plate; Second, the paper-faced gypsum board is not waterproof, and various water supply and drainage pipelines are generally hidden in the ceiling. Once some leakage occurs, all aluminum plates will fall.

4. As a main process before the processing of fluorocarbon aluminum veneer-field data measurement, it is advocated to use infrared rangefinder for measurement. Such as the use of traditional tape measure measurement, there will be measurement error, will bring very adverse effects to the needs of aluminum seam splicing.

5. Although the fluorocarbon aluminum veneer belongs to a kind of metal decoration plate, its fluorocarbon spraying layer is easy to scratch. Therefore, in addition to the need for manufacturers aluminum plate with protective film approach, in the transfer and device process should also focus on preventing scratches and heavy objects, otherwise it will seriously affect the overall appearance of the aluminum plate.